Welcome to FORTESCUE METAL MATERIALS (SHANDONG) CO., LTD.
Cost-effectiveness advantage
10% discount for new customers
Quality Advantage
Full process quality inspection
Fast delivery
Fast delivery after ordering
Titanium Ferro 40
Category:
Ferrotitanium
Keywords:
Titanium Ferro 40
PRODUCT INTRODUCTION
Introduction of Titanium Ferro 40
Titanium ferro 40 is a titanium alloy, usually made of titanium and iron in a specific ratio. The main components of titanium-iron-40 are 40% titanium and 60% iron.
When added during the smelting of steel or alloys, it can combine the lightweight properties of titanium with the strength of iron. It is widely used in many industrial fields, such as aerospace, automobile manufacturing and chemical industry.
Specifications and parameters of titanium iron 40
| Element | Concentration Range (%) | Significance |
| Titanium | 38.0 – 42.0 | Primary structural element |
| Iron | 55.0 – 60.0 | Reinforcement and stability |
| Carbon | ≤ 0.10 | Microstructure control |
| Oxygen | ≤ 0.20 | Impurity management |
| Nitrogen | ≤ 0.05 | Grain refinement |
| Silicon | ≤ 0.50 | Secondary strengthening element |
Elemental Interaction Mechanisms
The precise balance of elements creates a synergistic effect, enhancing mechanical properties through:
Solid solution strengthening
Grain boundary reinforcement
Microstructural stability
Comprehensive Performance Parameters
| Property | Specification | Implications |
| Density | 4.2 – 4.5 g/cm | Lightweight structural material |
| Melting Point | 1600 – 1700C | Exceptional thermal resistance |
| Tensile Strength | 550 – 650 MPa | High load-bearing capacity |
| Yield Strength | 480 – 580 MPa | Structural integrity maintenance |
| Elongation | 8 – 12% | Moderate ductility |
Microstructural Characteristics
Uniform grain distribution
Fine-grained microstructure
Minimal structural defects
Controlled phase transformations
Ferrotitanium properties
Mechanical Characteristics
High Strength-to-Weight Ratio
Superior strength compared to traditional alloys
Reduced material weight without compromising performance
Thermal Stability
Consistent mechanical properties across temperature ranges
Minimal thermal expansion
Resistance to thermal fatigue
Corrosion Resistance
Exceptional resistance to chemical degradation
Suitable for aggressive environmental conditions
Minimal surface oxidation
Metallurgical Advantages
Lightweight properties: Titanium-iron 40 combines the lightweight properties of titanium with the strength of iron, so it can reduce the weight of the overall structure while maintaining strength, and is particularly suitable for applications that require weight control.
Strength and corrosion resistance: With good mechanical strength and corrosion resistance, titanium-iron 40 performs well in bearing loads and resisting corrosion, and is suitable for industrial applications in a variety of harsh environments.
Machinability: Titanium-iron 40 is easy to process and form, and adapts to a variety of manufacturing processes, which makes the production process more flexible and efficient, and is also conducive to the production of parts with complex shapes.
Wide application: Due to its excellent comprehensive performance, titanium-iron 40 is widely used in many industrial fields such as aerospace, automobile manufacturing and chemical industry, and has become one of the important alloy materials.
Production process advantages: During the production process, through careful raw material selection, mixing methods, temperature control and sampling and testing, the quality and uniformity of titanium-iron 40 can be effectively guaranteed, and the performance and stability of the material can be improved.
Ferrotitanium production process
In the production process of titanium iron 40, it is very important to ensure the uniform mixing of titanium and iron. The following methods are usually used to ensure the uniformity of mixing:
1.Raw material selection
High-purity raw materials: Use high-purity titanium and iron powders to reduce the impact of impurities on the uniformity of mixing.
2.Powder processing
Powder refinement: Refine titanium and iron to make their particle size similar, increase the surface area, and help better mixing.
3.Mixing method
Mechanical mixing: Use efficient mechanical mixing equipment, such as planetary mixers or ball mills, to achieve uniform mixing in a shorter time.
Vibration mixing: Use a vibrating mixer to keep the particles moving during the mixing process, increase the contact area, and promote uniformity.
4.Mixing time and speed
Control the mixing time: Set the appropriate mixing time according to the performance of the equipment and the characteristics of the raw materials to avoid being too long or too short.
Adjust the stirring speed: According to different mixing equipment, adjust the stirring speed to achieve the best effect.
5.Sampling and testing
Regular sampling: Take samples regularly during the mixing process to test the uniformity of the samples and ensure the consistency of the final product.
Particle size analysis: Perform particle size analysis on the samples to ensure uniform distribution of titanium and iron.
6.Temperature control
Temperature effect: Control the ambient temperature during the mixing process to avoid changes in material properties due to temperature changes.
FACTORY APPEARANCE
Our main products are stainless steel sheets/coils/tubes and carbon steel sheets/coils/tubes and galvanized steel coils, galvanized steel coils, tinplate, round bars, steel bars, roof panels, spring steel strips, PPGI, PPGL and other structures Steel and pipe fittings, 72 kinds of steel, more than 2,900 specifications, more than 300,000 tons in stock.
PACKAGING AND SHIPPING
CUSTOMER VISIT
WHY CHOOSE US
Excellent core quality
With precise composition, high purity, and low impurities, it meets international export standards and improves the yield of smelting products.
Stable and reliable supply
We provide sample testing, full order tracking, and rapid response to quality issues.
Foreign Trade Services
It offers supporting customs declaration and logistics services, standardized documents, and compatibility with customs clearance in multiple countries.
Outstanding cost-performance ratio
Offering better prices for the same quality helps customers reduce costs and enhance their competitiveness.
Strong customization capabilities
Ingredients, particle size, and packaging can be customized to meet different order requirements.
Comprehensive after-sales support
We provide sample testing, full order tracking, and rapid response to quality issues.
Customer Reviews
★★★★★
Customer Reviews
★★★★★
Customer Reviews
★★★★★
Customer Reviews
★★★★★
ALLOY ORE PROCESSING FLOW
We specialize in the export of a wide range of alloy ores : Ferroalloys (Ferrochrome, Ferromanganese, Ferrosilicon) , Nickel Ore & Chrome Ore , Manganese Ore , Titanium Ore , Other specialty alloy ores tailored to meet specific industrial requirements.
Can I Get A Sample Tocheck Out The Quality?
Sure, Free Samples Are Available For Stockproducts If You Can Pay For The Shipping Cost.
How can weguarantee quality?
Always a pre-production sample before massproduction;Always final Inspection before shipment;
How to get a quotation?
Com Directlyour Salesman Will Provide You An Accurate Andprofessional Offer According To Your Requirements
What's the MoQ?
Forcustomized products, MOQ should be negotiated inadvance. There is no MOQ for sample orders,
IS you company factoryor Trade Company?
We have our own factory;Our type is factory + trade.
APPLICATION AREAS
The qualified rate of random inspections by third-party authoritative organizations is 100%, winning long-term trust from customers.
Petroleum
Marine Exploration
Coal Mine
Architectural Engineering
Electric Field
Boiler Field
Field of chemical industry
Textile Field
RELATED PRODUCTS
ASK FOR PRODUCT PRICE DISCOUNTS
CONTACT US
Room 1-1408, Building 1, Taihe Plaza Center, Shunhua Road Subdistrict, Jinan Area, China (Shandong) Pilot Free Trade Zone
MESSAGE
Copyright © FORTESCUE METAL MATERIALS (SHANDONG) CO., LTD. Powerby : CEGLOBAL SEO Privacy Statement